Stress-strain properties of microwave-irradiated polymer composite based on PDI-3A rubber

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The stress diagram of polymer composite material based on PDI-3A rubber filled with thermally expanded graphite or potassium chloride before and after microwave treatment for 300, 600, 900 and 1200 s has been studied. A twofold increase in tensile strength and deformability was found after microwave treatment for 300 c and testing at 223 K. With increasing the test temperature or microwave treatment time, a marked decrease in the deformation and tensile strength characteristics of the obtained composites was observed.

Texto integral

Acesso é fechado

Sobre autores

E. Nurullaev

Perm National Research Polytechnic University

Email: sadush@icp.ac.ru
Rússia, Perm

L. Khimenko

Perm National Research Polytechnic University

Email: sadush@icp.ac.ru
Rússia, Perm

A. Kozlov

Perm State Agro-Technical University

Email: sadush@icp.ac.ru
Rússia, Perm

S. Allayarov

Federal Research Center of Problems of Chemical Physics and Medicinal Chemistry RAS

Autor responsável pela correspondência
Email: sadush@icp.ac.ru
Rússia, Chernogolovka, Moscow region

Bibliografia

  1. Belkhir K., Riquet G., Becquart F. // Advances in Polymer Technology. 2022. V. 2022. Article ID 3961233. 21 p.
  2. Hoogenboom R., Schubert U.S., Wiesbrock F. // Microwave-assisted Polymer Synthesis. N-Y: Springer Cham, 2016. 351 p.
  3. Hosur M.V., Menon A., John M.K., Rangari V.K., Jeelani S. // International SAMPE symposium and exhibition. 2005. V. 50. P. 1659.
  4. Rakhmankulov D.L., Bikbulatov I.H., Shulaev N.S., Shavshukova S.Y. // Microwave radiation and intensification of chemical processes. M.: Khimiya, 2003. 220 p.
  5. Abutalipova E.M., Kuzeyev I.R., Shulaev N.S. // Oil and Gas Business. Electron. journal. 2013. № 4. P. 316.
  6. Abakacheva E.M., Suleymanov D.F. Shulaev N. S. // Butler Communications. 2011. V. 24. No. 1. P. 95.
  7. Nurullaev E., Khimenko L.L., Allayarov S.R. // High Energy Chemistry. L., Allayarov S. R. // High Energy Chemistry. 2024. V. 58. P. 242.
  8. Nurullaev E.M. // Applied Mechanics and Technical Physics. 2021. V. 62. № 2. P. 53.

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar
2. Scheme 1

Baixar (174KB)
Metadados
3. Fig. 1. Dependence of conventional stress on deformation of polymer composite material filled with thermally expanded graphite (a–c) or potassium chloride (d–e) on the time of microwave treatment (s): 0 (1), 300 (2), 600 (3), 900 (4), 1200 (5). The study was conducted at a temperature (K): 223 (a, d), 298 (b, d), 323 (c, e).

Baixar (355KB)
Metadados
4. Fig. 2. Dependences of the tensile strength (a, b), deformation (c, d) and elastic modulus (d, e) of PCM filled with thermally expanded graphite (a–c) or potassium chloride (d–e) on the microwave treatment time. The study of the deformation and strength characteristics was carried out at a temperature (K): 223 (1), 298 (2), 323 (3).

Baixar (366KB)
Metadados

Declaração de direitos autorais © Russian Academy of Sciences, 2024